As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Chairstore CT80YT Tall PU Leather Drafting Chair Review: Who It Fits

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Chairstore CT80YT is a tall drafting chair for counter-height desks and standing desks, not a gaming chair. Its seat rises from 23.62 to 31.1 in, high enough for a raised work surface, and an adjustable footrest ring gives your feet somewhere to rest at 8.46 to 13.58 in off the floor. It is covered in PU leather, uses a double-layer waterfall-edge seat cushion, and rides on a metal base with a class 4 gas lift rated for 300 lb, with BIFMA and SGS certification claimed. The Amazon brand field reads only "Chair", but the listing itself names the maker as Chairstore. We wrote this from the seller's listing and have not sat in the chair.

What stands out

  • 23.62 to 31.1 in seat height
  • Footrest ring 8.46 to 13.58 in
  • Flip-up padded arms
  • 300 lb, class 4 lift

Who it fits

Good fit for

People working at a counter, drafting table or raised standing desk who want a padded PU seat with back support.

Who should skip it

Skip it if your desk is standard height, since the seat does not drop below 23.62 in.

Verdict: A solidly specified tall chair with a stated 300 lb rating; check stock, which was low when we looked.

CT80YT measurements

Seat height 23.62 to 31.1 in

Suits counters and standing desks, too high for a regular desk.

Foot ring 8.46 to 13.58 in from the floor

Moves with you so your knees stay bent comfortably.

Class 4 gas lift, metal base

The heavier-duty cylinder grade; rated for 300 lb.

26.8 x 26.8 x 40.9 in, 38.6 lb

Footprint and weight from the listing.

S-curve back and thick PU seat

The backrest follows an S-curve to support the spine, and the seat is a double-layer high-density foam cushion with a waterfall front edge to ease pressure on the thighs. PU leather wraps the seat, back and arm pads, which makes spills easy to wipe. The padded arms lift up and adjust in height, so you can fold them out of the way to slide under a counter.

At a raised work surface

Set the seat so your elbows sit level with the counter, then bring the ring up until your thighs are roughly flat. Flip the arms up when you need to get close to the edge. The listing says the casters roll quietly on hard floors and carpet without marking them. Chairstore puts assembly at about 25 to 30 minutes with the included tools.

Points to check

Measure the height of your work surface first: a drafting chair seat this tall only suits a surface around counter height or higher. The listing gives no recline or tilt figure, and the back is a fixed mid-height design without a headrest. Stock was listed as low.

Check before you buy

  • Work surface at counter height or above
  • The 300 lb class 4 rating covers you
  • No recline needed
  • Arms that fold away matter to you

The product at a glance

Chairstore Tall PU Leather Drafting Chair

Best for: Counter-height and standing desks

Upholstery Material
PU leather
Armrest Adjustability
flip-up, height-adjustable
Weight Capacity
300 lbs
Seat Cushion Type
high-density foam
Safety Certifications
BIFMA, SGS
Features
Footrest, Adjustable Arms

View on Amazon: Chairstore Tall PU Leather Drafting Chair Affiliate link

Chairstore CT80YT black tall drafting chair: PU leather, S-curve backrest, double-layer waterfall seat, flip-up height-adjustable arms, footrest ring 8.46-13.58 in, seat 23.62-31.1 in, metal base, class 4 gas lift, BIFMA and SGS, 300 lb, 38.6 lb.

Pros

  • Tall seat range for counters
  • Adjustable foot ring
  • Stated 300 lb rating with class 4 lift

Cons

  • Too tall for a standard desk
  • No tilt or recline listed
  • Low stock

Good fit if

  • You draft or work at a counter-height bench
  • You like a wipeable PU seat

Skip if

  • Your desk is ordinary sitting height
  • You want a reclining back or headrest

Verdict: A tall PU drafting chair with a strong stated rating.

Specifications side by side

Spec Chairstore Tall PU Leather Drafting Chair
Upholstery Material PU leather
Armrest Adjustability flip-up, height-adjustable
Weight Capacity 300 lbs
Seat Cushion Type high-density foam
Safety Certifications BIFMA, SGS
Features Footrest, Adjustable Arms
Material Faux Leather
Color Black
Dimensions 26.8 × 26.8 × 40.9 inches
Weight 38.6 pounds
Size 26.77 x 26.77 x 40.94 inches
Model CT80YT

Frequently asked questions

What seat height does the Chairstore CT80YT reach?

From 23.62 to 31.1 in.

How high can the CT80YT foot ring go?

It adjusts from 8.46 to 13.58 in above the floor.

Can the CT80YT arms be raised out of the way?

Yes, the PU armrests flip up and also adjust in height.

Is the Chairstore CT80YT a gaming chair?

No, it is a tall drafting chair for counters and standing desks.

See also