As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Chairstore CT16KT Mid-Back PU Leather Drafting Chair Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Chairstore CT16KT is a mid-back drafting chair in black PU leather for standing desks and counter-height work surfaces; it is not a gaming chair. Its seat adjusts from 24.41 to 31.89 in, a little higher at both ends than Chairstore's taller-backed CT80YT, and a foot ring sets between 7.48 and 11.81 in. Dual-density foam fills the waterfall-edge seat, the arms flip up and adjust in height, and the metal base with a class 3 gas cylinder is rated for 300 lb under BIFMA standards. Brand shows as "Chair" on the product page, while the listing text calls it the Chairstore drafting chair. These notes come from the listing; we have not tried the chair ourselves.

What stands out

  • Seat up to 31.89 in
  • Foot ring 7.48 to 11.81 in
  • Flip-up adjustable arms
  • 300 lb BIFMA rating

Who it fits

Good fit for

Anyone at a tall standing desk or workbench who wants a padded mid-back seat they can perch on.

Who should skip it

Pass on it if you sit at a regular desk or want a reclining, headrest-equipped chair.

Verdict: A well-specified mid-back drafting chair; the 24.41 in minimum is the main fit limit.

CT16KT key numbers

Seat height 24.41 to 31.89 in

Made for tall desks; it cannot drop to standard desk height.

Foot ring 7.48 to 11.81 in

Gives your heels a rest at drafting height.

Class 3 gas cylinder, 300 lb

Metal base, BIFMA certification claimed.

29.5 x 28.7 x 40.9 in, 34.2 lb

A wide base footprint for stability.

Mid-back PU build

An S-curve backrest stops at mid-back height and targets lumbar and hip support rather than the shoulders. The seat uses two layers of high-resilience foam with a waterfall edge, and the PU cover is described as scratch-resistant and easy to wipe. Dual-wheel casters are listed for both hard floors and carpet.

Working at height

Raise the seat until your forearms rest on the work surface, then set the ring under your feet so your legs are not dangling. The arms flip up to let the chair slide under a counter lip. Chairstore quotes 25 to 30 minutes for assembly, with tools in the box.

What to confirm

The listing gives no tilt or recline range and there is no headrest. Compare your counter height with the 24.41 in lowest setting before ordering, since a standard desk will be too low for this seat.

Check before you buy

  • Tall desk or counter
  • Mid-back support is enough
  • Up to 300 lb
  • No tilt figure needed

The product at a glance

Mid-Back PU Leather Drafting Chair

Best for: Tall desks and workbenches

Upholstery Material
PU leather
Armrest Adjustability
Flip-up, height-adjustable
Weight Capacity
300 lbs
Seat Cushion Type
Dual-layer high-resilience foam
Safety Certifications
BIFMA
Features
Footrest, Adjustable Arms

View on Amazon: Mid-Back PU Leather Drafting Chair Affiliate link

Chairstore CT16KT black mid-back drafting chair: PU leather, S-curve back, dual-density waterfall seat, flip-up height-adjustable arms, foot ring 7.48-11.81 in, seat 24.41-31.89 in, metal base, class 3 gas cylinder, BIFMA, 300 lb, 34.2 lb.

Pros

  • High seat range for tall desks
  • Adjustable foot ring
  • Arms flip up

Cons

  • Mid-back only, no headrest
  • No tilt range given
  • Not usable at a standard desk

Good fit if

  • You stand or perch at a raised bench
  • You want a PU seat that wipes down

Skip if

  • You sit at a regular-height desk
  • You want to lean back and rest your head

Verdict: A mid-back PU drafting chair for raised work surfaces.

Specifications side by side

Spec Mid-Back PU Leather Drafting Chair
Upholstery Material PU leather
Armrest Adjustability Flip-up, height-adjustable
Weight Capacity 300 lbs
Seat Cushion Type Dual-layer high-resilience foam
Safety Certifications BIFMA
Features Footrest, Adjustable Arms
Back Style Mid-Back
Material Faux Leather
Color Black
Dimensions 28.7 × 29.5 × 40.9 inches
Weight 34.2 pounds
Size 29.53 x 28.74 x 40.94 inches
Model CT16KT

Frequently asked questions

How tall does the Chairstore CT16KT seat go?

Its highest setting is 31.89 in, and the lowest is 24.41 in.

What range does the CT16KT foot ring cover?

7.48 to 11.81 in from the floor.

How is the CT16KT different from the CT80YT?

The CT16KT is mid-back with a class 3 cylinder and a slightly higher seat range; the CT80YT has a class 4 lift and a 23.62 to 31.1 in seat.

Will the CT16KT work on carpet?

The listing says its dual-wheel casters roll on hard floors and carpet.

See also