Tempur-Pedic TP7000C Mesh Task Chair Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Tempur-Pedic TP7000C is a mesh-back task chair whose seat is TEMPUR material topped with a cooling gel layer, and that seat is the reason to look at it. The rest is a conventional office chair: built-in lumbar in the mesh back, synchro-tilt with tension and lock, arms that move up, down and in or out, and a 275 lb rating. The C in the name marks the gel seat; the plain TP7000 uses the same frame without it. This Agate listing sits in the low $300s, a little above the non-gel TP7000 colours. Everything here comes from the listing and Tempur-Pedic's published specs, not from sitting in it.
What stands out
- TEMPUR seat with cooling gel top
- Breathable mesh back with built-in lumbar
- Synchro-tilt, tension and tilt lock
- Height- and width-adjustable arms
Who it fits
Good fit for
Home-office workers who run warm and want a memory-foam style seat on a regular mesh task chair.
Who should skip it
Skip it if you need more than 275 lb of capacity, a headrest, or lumbar you can move up and down.
Verdict: A plain task chair with an unusual seat: worth it if a cooler TEMPUR cushion is what you are after.
TP7000C specs and what they mean
TEMPUR material + cooling gel top layer
The seat shapes to you, and the gel is meant to keep it from feeling hot.
Seat 20.9 in W x 20.1 in D
A roomy seat for a mid-size task chair.
Backrest 20.9 in W x 22.4 in H
Covers the mid and upper back; there is no headrest.
Overall 40.6-44.1 in H x 27.2 in W
About 3.5 in of height travel; check it clears your desk at the low end.
Rated to 275 lb
A standard rating; heavier users should look at a big and tall model.
Synchro-tilt with tension and lock
Seat and back recline together, and you can lock the angle.
How the TP7000C is built
The back is open mesh with lumbar support shaped into it rather than added as a separate pad, so there is no lumbar knob to adjust. The seat is a cushioned fabric cover over TEMPUR material, with the cooling gel on top. It sits on a nylon base with rolling casters. Tempur-Pedic lists the chair at 58.7 lb, which is heavy for a task chair and points to a substantial seat.
Daily use
Tempur-Pedic pitches the chair for 8-10 hours of sitting a day. Synchro-tilt lets you lean back while the seat follows at a slower rate, and tilt tension sets how much effort that takes; lock it upright for typing. The arms adjust in height and width, which helps keep shoulders relaxed on a wide desk. Mesh on the back and gel on the seat both aim at heat, the main complaint about all-foam chairs.
Check before ordering
The listing's height field says 40 in while the overall range is 40.6-44.1 in; use the range. The lumbar is fixed, so sit-test or check your back length against the 22.4 in backrest if you can. Tempur-Pedic sells the same gel chair in several colours (Coal, Red, Green, Denim, Cobalt, Blue) at a similar price.
Check before you buy
- You weigh 275 lb or less
- Fixed lumbar suits you
- No headrest needed
- Desk fits a 40.6-44.1 in tall chair
The product at a glance
Tempur-Pedic TP7000C Mesh Fabric Chair
Best for: Warm sitters
- Upholstery Material
- Mesh, fabric
- Lumbar Support
- Built-in
- Armrest Adjustability
- Height- and width-adjustable
- Weight Capacity
- 275 lbs
- Seat Cushion Type
- TEMPUR material with cooling gel
- Features
- Lumbar Support, Adjustable Arms
View on Amazon: Tempur-Pedic TP7000C Mesh Fabric Chair Affiliate link
Tempur-Pedic TP7000C (TP7000-C-AGATE), Agate: mesh back with built-in lumbar, fabric seat over TEMPUR material with a cooling gel top layer, synchro-tilt with tension and lock, height- and width-adjustable arms, nylon base. Seat 20.9 x 20.1 in, 40.6-44.1 in tall, 275 lb.
Pros
- Gel-topped TEMPUR seat
- Mesh back for airflow
- Two-way arms (height, width)
Cons
- Lumbar is not adjustable
- No headrest
- 275 lb limit
Good fit if
- Your seat gets hot on foam chairs
- You want a sculpted cushion
Skip if
- You need over 275 lb
- You want moving lumbar or a headrest
Verdict: A conventional mesh task chair with a cooler TEMPUR seat.
Specifications side by side
| Spec | Tempur-Pedic TP7000C Mesh Fabric Chair |
|---|---|
| Upholstery Material | Mesh, fabric |
| Lumbar Support | Built-in |
| Armrest Adjustability | Height- and width-adjustable |
| Weight Capacity | 275 lbs |
| Seat Cushion Type | TEMPUR material with cooling gel |
| Features | Lumbar Support, Adjustable Arms |
| Material | Fabric |
| Dimensions | 20.1 × 27.2 × 40 inches |
| Weight | 58.7 pounds |
| Size | 40.6-44.1"H x 27.2"W x 20.1"D |
| Color | Agate |
| Model | TP7000-C-AGATE |
Frequently asked questions
What is the difference between the TP7000 and TP7000C?
The TP7000C adds a cooling gel layer on top of the TEMPUR seat; the TP7000 has the TEMPUR seat without the gel.
How much weight does the TP7000C hold?
Tempur-Pedic rates it to 275 lb.
Does the TP7000C have adjustable lumbar?
No. Lumbar support is built into the mesh back and is not adjustable on this listing.
How big is the TP7000C seat?
20.9 in wide and 20.1 in deep.
See also
- sihoo b100 se ergonomic office chair review
- ecotouge brown tufted wingback office chair review
- sweetcrispy djy02 green fabric gaming chair review
- tempur pedic tp9000 mesh swivel task review
- tempur pedic tp7000 mesh high back review
- Tempur-Pedic TP9000 Black Vinyl Cooling Gel Task Chair Review: Specs, Pros and Cons
- tempur pedic tp8200 ergonomic fabric mid back review
- tempur pedic tempur adapt review
