GTPLAYER GTP100-NEW Blue Gaming Chair Review: Removable Cover and Footrest
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The GTPLAYER GTP100-NEW in blue is a high-back gaming chair with one trick most budget racers lack: the PU leather back cover zips off to expose a mesh backrest, so you can run it cool in summer and covered in winter. Around that it is a familiar footrest recliner, with linkage arms that follow the back through a 90-135 degree tilt, neck and lumbar pillows, and an SGS-certified gas lift. Blue sells for under $130, a little more than the white and black versions. GTPLAYER does not publish a weight limit for it. We based this on GTPLAYER's listing and published specs, not on sitting in it.
What stands out
- Removable back cover over mesh
- Linkage arms through 90-135 degrees
- Retractable footrest
- 24-month parts replacement or repair
Who it fits
Good fit for
Players in warm rooms who want a leather-look gaming chair that can still breathe, in a blue colourway.
Who should skip it
Skip it if you need a stated weight rating, a deeper recline than 135 degrees, or the lowest price of this model.
Verdict: A budget footrest chair with a useful mesh-or-cover option; choose blue for the colour, not the price.
GTP100-NEW blue specs
Detachable PU leather back cover
Remove it for mesh airflow, refit it for warmth.
Tilt 90-135 degrees, linkage arms
Arms move with the back so elbows stay supported.
Retractable footrest
Slides out to hold your legs while you lean back.
Overall 27.55 x 19.65 x 48.03 in
A standard high-back size; check room behind the chair.
39.7 lb, all-metal frame, SGS gas lift
A sturdy base for a sub-$150 chair.
Weight capacity: not listed
Ask GTPLAYER for a figure before ordering if you are a heavier user.
Cover, cushions and frame
Underneath the cover is a mesh back; the cover itself is PU leather in blue with matching trim. The seat cushion is described as shaping cotton and native cotton, with an enlarged neck pillow and lumbar pillow. The frame is all metal and the gas lift carries SGS certification.
Day to day
Seat height uses its own pedal lever, independent of the linkage arms. Lean back and the arms follow; pull the footrest out for a break. In hot weather take the cover off and you sit against mesh; refit it when the room cools. Support covers 30-day returns plus two years of parts repair or replacement.
Before ordering
Every GTP100-NEW colour in the -02 series uses the same bullets and size fields. White and black cost a little less than blue, red sits close to blue. The 135 degree limit is shallower than many footrest chairs that tilt to 150 or more.
Check before you buy
- You want the mesh-or-cover option
- A 135 degree tilt is enough
- No stated capacity is acceptable
- Blue suits your setup
The product at a glance
GTPLAYER Gaming Chair with Detachable Mesh Cover
Best for: Warm-room gaming
- Upholstery Material
- PU leather, mesh
- Lumbar Support
- Lumbar pillow
- Armrest Adjustability
- Linkage
- Headrest Type
- Neck pillow
- Seat Cushion Type
- Shaping cotton, native cotton
- Safety Certifications
- SGS
View on Amazon: GTPLAYER Gaming Chair with Detachable Mesh Cover Affiliate link
GTPLAYER GTP100-NEW, blue: high-back gaming chair with detachable PU leather back cover over mesh, neck and lumbar pillows, linkage arms, 90-135 degree tilt, retractable footrest, metal frame, SGS gas lift, 39.7 lb, 24-month parts cover. No capacity listed.
Pros
- Mesh back under a removable cover
- Arms follow the recline
- Two-year parts cover
Cons
- No weight capacity listed
- Tilt stops at 135 degrees
- Blue costs a little more than white or black
Good fit if
- Your room runs warm
- You want a footrest on a budget
Skip if
- You need a published capacity
- You want a near-flat recline
Verdict: Flexible-cover footrest chair in blue.
Specifications side by side
| Spec | GTPLAYER Gaming Chair with Detachable Mesh Cover |
|---|---|
| Upholstery Material | PU leather, mesh |
| Lumbar Support | Lumbar pillow |
| Armrest Adjustability | Linkage |
| Headrest Type | Neck pillow |
| Seat Cushion Type | Shaping cotton, native cotton |
| Safety Certifications | SGS |
| Features | Lumbar Support, Footrest |
| Back Style | High Back |
| Material | Leather |
| Dimensions | 19.7 × 27.6 × 48 inches |
| Weight | 39.7 pounds |
| Size | 27.55 x 19.65 x 48.03 inches |
| Color | Blue-02 |
| Model | GTP100-NEW |
Frequently asked questions
Can you remove the cover on the GTPLAYER GTP100-NEW?
Yes, the leather back cover comes off to expose a mesh backrest.
How far does the blue GTP100-NEW tilt?
From 90 to 135 degrees, with arms that move along.
Does it have a footrest?
Yes, a long retractable one.
What warranty does GTPLAYER give?
Returns within 30 days, and parts repaired or replaced for 24 months.
See also
- dowinx ls 6657d green fabric gaming chair review
- ecotouge keab008 microfiber wingback recliner review
- hbada e3 ultra ergonomic office chair review
- gtplayer gaming chair footrest review
- gtplayer gaming chair review
- GTPLAYER Big and Tall 400 lb Gaming Chair Review: Specs, Pros and Cons
- GTPLAYER CH228 PU Leather Office Chair Review: Who It Fits and Who Should Skip It
- GTPLAYER Big and Tall Fabric Gaming Chair Review: Who It Fits and Who Should Skip It
- gtplayer gaming chair review
- ibuypower trace mesh gaming PC review
